《互换性与测量技术基础》习题参考解答（第3版）
第二章光滑圆柱体结合的公差与配合
1.
孔或轴｜最大极限尺寸｜最小极限尺寸｜上偏差｜下偏差｜公差｜尺寸标注｜
孔: Φ10｜9.985｜9.970｜-0.015｜-0.030｜0.015｜Φ10｜
孔: Φ18｜18.017｜18｜+0.017｜00.017｜Φ18｜
孔: Φ30｜30.012｜29.991｜+0.012｜-0.009｜0.021｜Φ30｜
轴: Φ40｜39.95｜39.888｜-0.050｜-0.112｜0.062｜Φ40｜
轴: Φ60｜60.041｜60.011｜+0.041｜+0.011｜0.030｜Φ60｜
轴: Φ85｜85｜84.978｜0-0.022｜0.022｜Φ85｜
2. 1) Xmax= 0.033- (-0.098) =0.131mm
Xmin= 0 - (-0.065) =0.065mm
Tf= | 0.131-0.065 | =0.066mm
2) Ymax= 0 – 0.060 =-0.060mm
Ymin= 0.030 – 0.041 =-0.011mm
Tf= | -0.060+0.011 | =0.049mm
3) Xmax= 0.007- (-0.016) =0.023mm
Ymax= -0.018 – 0 =-0.018mm
Tf= | 0.023 – (-0.018)| =0.041mm
4) Xmax= 0.039 - 0.002 =0.037mm
Ymax= 0 – 0.027 =-0.027mm
Tf=|0.037 – (-0.027)| =0.064mm
5) Xmax= 0.074 – (-0.140) =0.214mm
Xmin= 0 - (-0.030) = +0.030mm
Tf=| 0.214 – 0.030 | =0.184mm
6) Xmax=0.009 – (-0.019) =0.028mm
Ymax= -0.021 – 0 =-0.021mm
Tf=| 0.028 – (-0.021) | =0.049mm
3. (1) Φ50Xmax =0.089mmXmin =0.025mm基孔制、间隙配合
（2）Φ80Xmax =0.250m
标签：习题,互换性,第三版
